Barnfield Valve & FittingConcealed Cistern Flush Valve and Syphon Maintenance
Tailored for homes and commercial washrooms where toilets run continually into the pan, fail to flush completely, or leak through ductwork. We access the hidden cistern through the front flush plate or service hatch without disturbing adjacent framing. We renew base seals, replace failing pneumatic bellows, or swap out worn fill and discharge valves.
What is included
- ✓Non-destructive removal of flush actuation plates
- ✓Cable and pneumatic line continuity inspection
- ✓Replacement of silicone flush valve drop seals
- ✓Adjustment of overflow levels to current Water Regulations
- ✓Float valve diaphragm replacement or full valve swap
- ✓Pan clearance and continuous-dribble leak checks
Request a Technical Visit
We will review your inquiry and contact you to arrange a suitable inspection slot.
Twelve-Month Fitting Guarantee
All mechanical compression joints, renewed valve bodies, and replacement cartridges installed by us carry a full twelve-month workmanship guarantee. If an installed seal, joint, or valve body we fitted weeps or malfunctions under normal use during this window, we return promptly to correct it at no additional cost. Pricing & payment
Questions about this service
Can you service Geberit, Grohe, and Thomas Dudley concealed units?
Yes, we carry genuine replacement diaphragms, flush seals, and complete pneumatic towers for all major European concealed systems.
Why does my toilet still run when the float is set below the overflow pipe?
This usually indicates that the soft silicone washer at the base of the flush valve has degraded or accumulated limescale, allowing water to pass directly into the pan.
Do you need to cut my wall tiles to reach the valve?
No, standard concealed cisterns are designed to have all wearable parts removed directly through the rectangular access opening behind the push-plate.
How We Carry Out Work
-
1
Flush plate removal
We unhook the magnetic or clip-fit fascia plate to access the internal frame mechanism.
-
2
Internal assembly extraction
Pneumatic lines are disconnected and the dual-flush tower is twisted out through the aperture.
-
3
Seal refurbishment
Perished silicone base seals are stripped, the seating ring cleaned of scale, and new seals aligned.
-
4
Refill and operational check
The cistern is filled to the waterline mark, checked for silent shut-off, and cycle-tested five times.
Why Property Owners Choose Us
Mechanical overhaul and seal renewal for built-in and back-to-wall toilet cisterns.
Stops water wastage
Eliminates the continuous internal trickle that inflates metered water bills and stains toilet bowls.
Maintains surrounding joinery
All maintenance is completed strictly through the flush-plate hole, protecting bespoke boxing and tiles.
Quiet refilling
Worn, hissing float valves are adjusted or upgraded to quiet brass-shank or equilibrium units.
All services
Recent Client Feedback
Fitted our stopcock neatly under the sink.
Nigel P., Exeter, GBReplaced the kitchen valve cleanly this morning.
Martin B., Exeter, GBShower dripping stopped after the replacement thermostatic valve insert was fitted, though the technician arrived twenty minutes past the morning slot.
Sarah H., Topsham, GBDiscuss Your Valve or Water Fitting Issue
Submit an outline of your plumbing valve requirements or call our office directly. We evaluate pipe sizes, schedule an on-site visit, and supply a clear fixed price before commencement.